JSW Neosteel 500D CRS TMT Bar

JSW Neosteel 500D CRS TMT Bar is available from Newton Exports across the full size range listed below.

Structures built along India’s coastline face a different set of engineering demands than inland construction, starting with the steel itself, and JSW addressed that difference with a dedicated CRS product line. JSW Neosteel CRS bars are high-strength, corrosion-resistant TMT rebars designed to withstand moisture, salinity, and chemical exposure, delivering long-term performance in conditions where ordinary reinforcement steel deteriorates well before its intended service life ends.

Neosteel 500D CRS keeps carbon content tighter than the IS 1786 Fe500D CRS ceiling, typically around 0.14% against a 0.15% maximum, while sulphur and phosphorus are held near 0.030% each, supported by anti-corrosive alloying chemistry engineered specifically for the CRS range. Mechanically, the grade delivers a typical 530 MPa yield strength and 600 MPa tensile strength with a 1.10 UTS/YS ratio and 16% minimum elongation, matching Fe500D CRS mechanical performance while adding the refined microstructure that gives Neosteel CRS its corrosion resistance in demanding environmental conditions.

Manufactured with high-purity steel and precision alloying at JSW’s HYQST-equipped, GreenPro-certified facilities, the bar’s rib pattern is engineered for the same optimal concrete adhesion found across the standard Neosteel range, so corrosion resistance does not come at the cost of structural bond strength. Newton Exports offers this rebar in 8mm to 32mm sizes for coastal housing developments, industrial plants operating in humid or chemically active environments, and marine-adjacent infrastructure work where reinforcement life needs to match or exceed the structure’s design life.